Contact

E-mail: 1298838070@qq.com

Tel: +8613511656218

Address: No.118 Beihuan Road, East Steel City, XiShan District, WuXi, Jiangsu, China


Inconel 600/625/x750/718/825 Black/polished Round Bar

Inconel 600/625/x750/718/825 Black/polished Round Bar

Inconel600 is an alloy mainly made up of nickel ,chromium and iron. It has good corrosion resistance , oxidation resistance, excellent cold and hot processing and welding properties. It has satisfactory thermal strength and high plasticity at 700 degrees. Application area: Nuclear reactor,heat...

Inconel600 is an alloy mainly made up of  nickel ,chromium and iron. It has good corrosion resistance , oxidation resistance, excellent cold and hot processing and welding properties. It has satisfactory thermal strength and high plasticity at 700 degrees.


Application area:

Nuclear reactor,heat treatment furnace,petrochemical production.

Chemical composition(WT%)

(C) :≤0.15

(Si) :≤0.50

(Mn) :≤1.00

(S) :≤0.024

(Ni) : ≥72

(Cr) : 14 to 17

(Fe):  6 to 10

(Cu): ≤0.005

(P): ≤0.015

(B): ≤0.006

(Ti): ≤0.3

(Al): ≤0.3


physical property

tensile strength:≥550MPa

Yield strength:≥240MPa

Elongation:≥30%

 

This alloy usually need to be customized as your request because the price of this material is high.

The delivery date is depend on the order quantity.

 

FAQ: 

The cold working of inconel600 alloy.

1.Cold working material should be annealed or solid solution heat treatment, and the working hardening rate of 600 alloy should be close to austenitic stainless steel, so it can choose similar processing equipment.

2.Intermediate annealing shall be carried out during the cold work.

3.When the amount of cold work is greater than 5%, the workpiece needs to be treated with solid solution.

4.To reduce the wear of materials, the die shall be made of alloy tool steel, carbide or cast steel.


Inconel 600 alloy bar


图片52.jpg

Inquiry