Contact

E-mail: 1298838070@qq.com

Tel: +8613511656218

Address: No.118 Beihuan Road, East Steel City, XiShan District, WuXi, Jiangsu, China


201 Stainless Steel 4*8 2b/hl/no.1/no.4/8k /embossed Sheet/plate

The characteristic of 201 stainless steel is acid-resisting, alkali-resistance, high density, no bubbles by polishing, no pinhole and etc., It is high-quality material in the production of various straps and covers. Application area: Decorative tubes, industrial tubes, water tank,and some...

The characteristic of 201 stainless steel is acid-resisting, alkali-resistance, high density, no bubbles by polishing, no pinhole and etc., It is high-quality material in the production of various straps and covers.

201 Stainless Steel 4*8 2B/HL/NO.1/NO.4/8K /embossed Sheet/plate

201 stainless steel with, polishing no bubbles, no pinhole and other characteristics, is the production of a variety of case, strap bottom cover high-quality materials.


Embossing is a metal forming process for producing raised or sunken designs or relief in sheet material by means of matched male and female roller dies, theoretically with no change in metal thickness.

The illustration shows the metal sheet entering the roller, and then the embossed sheet leaving toward the drawing rollers.


Application area:

Decorative tubes, industrial tubes, water tank,and some shallow stretch products.

Chemical composition(WT%)

(C) :≤0.15

(Si) :≤0.75

(Mn) :5.5 to 7.50

(Cr) :16.0 to 18.0

(N) :≤0.25

(P) :≤0.060

(S) :≤0.030

(Ni) : 0.8 to 1.2%

(Cu) : Half 0.8%  ,High 1.5%

 

physical property

tensile strength:≥520MPa

Yield strength:≥275MPa

Elongation:55 to 60%

 

The normal size of 201 stainless steel sheet is 1000mmx2000mm, 1219mmx2438mm, 1500mmx6000mm,1800mmx6000mm, thickness range from 0.3mm to 12mm are all ready is stock.

Usually, it only takes 3 working days for us to make delivery if the products are ready in stock.

Of course, unusual size can also be customized according your request.


The product process 

A. GRINDING 

Grinding finished, also called brushed, direction or satin finished coil or sheet.

B. POLISHED 

Polished stainless steel sheet used grinding fluid to polish by polishing    

equipment on stainless steel sheet

C. PVD COLOR COATING 

PVD means physical vapor deposition, working in vacuum condition.

D. ETCHING 

Etching is corrode different kinds of patterns on stainless steel surfaces by 

chemical methods.

E. EMBOSSING 

It is physical rolling on the stainless steel surface, pattern comes from metal 

Rolled. 


FAQ: 

Will the 201 stainless steel sheet gathers rust easily?

When the brown rust appeared on 201 stainless steel surface , people may be surprised and think if it gathers rust, it is not stainless steel any more and there is some problem with 201 stainless steel. In fact, this is a misconception of stainless steel because they do not know stainless steel too much.

There is a thin and solid chromium oxide film (protective film) on the cover of stainless steel to prevent the infiltration of oxygen atoms. Once the protective film is destructed by something, the stainless steel will also gather rust. So the surfaces of stainless steel must be cleaned and scrubbed regularly to remove attachments and eliminate external factors that cause corrosion.


201 HL surface stainless steel sheet


图片10(001).jpg


201 2B surface stainless steel sheet


图片11(001).jpg


201 8K surface stainless steel sheet


图片12(001).jpg


201 NO.1 surface stainless steel sheet


图片13(001).jpg

Inquiry