Contact Us

E-mail: carol@jianghehaisteel.com
Skype:1992919wangli

CELL PHONE: 0086 18762673219

Address: No.118 Beihuan Road, East Steel City, XiShan District, WuXi, Jiangsu, China

Inconel600/inconel X750 Thick Stainless Steel 4*8 2B/NO.1 Sheet and Plate

Inconel600/inconel X750 Thick Stainless Steel 4*8 2B/NO.1 Sheet and Plate

Inconel600 is an alloy mainly made up of nickel ,chromium and iron. It has good corrosion resistance , oxidation resistance, excellent cold and hot processing and welding properties. It has satisfactory thermal strength and high plasticity at 700 degrees. Application area: Nuclear reactor,heat...

Inconel600 is an alloy mainly made up of  nickel ,chromium and iron. It has good corrosion resistance , oxidation resistance, excellent cold and hot processing and welding properties. It has satisfactory thermal strength and high plasticity at 700 degrees.


Application area:

Nuclear reactor,heat treatment furnace,petrochemical production.

Chemical composition(WT%)

(C) :≤0.15

(Si) :≤0.50

(Mn) :≤1.00

(S) :≤0.024

(Ni) : ≥72

(Cr) : 14 to 17

(Fe):  6 to 10

(Cu): ≤0.005

(P): ≤0.015

(B): ≤0.006

(Ti): ≤0.3

(Al): ≤0.3


physical property

tensile strength:≥550MPa

Yield strength:≥240MPa

Elongation:≥30%

 

This alloy usually need to be customized as your request because the price of this material is high.

The delivery date is depend on the order quantity.

 

FAQ: 

The hot working of inconel600 alloy.

1.The range of hot working temperature is 1200℃ to 900℃ and the cooling mode is water quenching or rapid air cooling.

2.Heat treatment should be carried out after thermal processing for the best corrosion resistance and the optimum crystal structure.

3.The material can be sent directly into the furnace which has been warmed up.


Inconel600 alloy sheet


图片37.jpg

Inquiry