1050 1060 Thickness 0.12mm, 0.1mm, 0.15mm, Galvanised Corrugate Aluminum Sheet

Inconel 600 is an alloy mainly made up of  nickel ,chromium and iron. It has good corrosion resistance , oxidation resistance, excellent cold and hot processing and welding properties. It has satisfactory thermal strength and high plasticity at 700 degrees.

Application area:

Nuclear reactor,heat treatment furnace,petrochemical production.

Chemical composition(WT%)

(C) :≤0.15

(Si) :≤0.50

(Mn) :≤1.00

(S) :≤0.024

(Ni) : ≥72

(Cr) : 14 to 17

(Fe):  6 to 10

(Cu): ≤0.005

(P): ≤0.015

(B): ≤0.006

(Ti): ≤0.3

(Al): ≤0.3

physical property

tensile strength:≥550MPa

Yield strength:≥240MPa

Elongation:≥30%

This alloy usually need to be customized as your request because the price of this material is high.

The delivery date is depend on the order quantity.

FAQ: 

The hot working of inconel600 alloy.

1.The range of hot working temperature is 1200℃ to 900℃ and the cooling mode is water quenching or rapid air cooling.

2.Heat treatment should be carried out after thermal processing for the best corrosion resistance and the optimum crystal structure.

3.The material can be sent directly into the furnace which has been warmed up.

Inconel 600 alloy sheet

Hot Tags: inconel 600/x750 alloy thick stainless steel 4*8 2b/no.1 sheet and plate, China inconel 600/x750 alloy thick stainless steel 4*8 2b/no.1 sheet and plate manufacturers, suppliers, factory, 0 4mm stainless steel sheet, 304 Stainless Steel Shaft, 304 stainless steel sheet, 201 Stainless Steel Rod, 321 stainless steel round bar, stainless steel threaded pipe